Skip to content

Glass Reach-In Doors

Glass Reach-In Cooler Doors.
Shoppers See the Product.

Glass doors for beer coolers, dairy cases and grab-and-go coolers. Customers see the product through the glass. The room behind it stays sealed and cold. Anthony International is the main brand we install and service.

Start Your Project

Glass Reach-In Doors

The Only Part Your Customers Touch.

Glass reach-in cooler doors are the only part of a walk-in your customers ever touch. They have to show off what’s inside, stay clear, and close on their own. A heater wire keeps the glass from fogging. That wire, the frame and the box behind the glass take just as much load as the glass does.

Anthony International

Three Doors, or Twenty‑One.

We’ve hung as few as three doors, and as many as twenty-one in a row. We build the box behind them too.

Anti-fog, LED-lit glass reach-in doors for grocery, liquor and convenience stores
We cut new openings into your walk-in, or build a new box — panels, frames, doors and lights, one job.
Foggy glass, dead LED strips, torn gaskets, doors that won’t shut — ours or anyone’s
The walk-in coolers we build behind the glass →

Older doors already in place? Start with cold storage door repair — the fix might be a heater wire, not a whole new door. Behind the glass doors, the same box usually needs pass-through and traffic doors on the stocking side, and an RSNE-built insulated cooler door on the crew side.

Black-framed glass reach-in doors lit by vertical LED strips down the right wall of the Yankee Spirits beer cooler, white insulated panel wall opposite and a diamond-plate floor between them

Project

Yankee Spirits. Store After Store.

Yankee Spirits · Sturbridge, MA

Old Coolers Out. New Glass Doors In.

The original beer coolers were built into the buildings. Each one was an odd shape, old and worn out. RSNE tore out each one, designed a new one to fit that store, and reopened with new glass doors shoppers buy from.

Seven to twenty-one glass reach-in doors, depending on the store
Pass-through doors and RSNE-built insulated cooler doors in the same box
1,200 sq ft retail cooler in Sturbridge, one of several locations
Read the Yankee Spirits build →
Looking down the Yankee Spirits beer cooler from the back corner: an evaporator on the near wall, glass reach-in doors with product behind them along the right, diamond-plate floor running to the far end

FAQ

Glass reach-in cooler doors, answered.

Can you install glass doors into an existing walk-in?
Yes. If the cooler itself is in good shape, we cut the openings, frame them, and hang the doors — usually without shutting the cooler down for more than a work shift. If it isn’t, we’ll tell you before you spend money on doors.
Which brands do you install?
Anthony International is the main brand we install, and we service the other major display-door brands too. Both can come with LED lighting and anti-fog packages.
My glass doors fog up — can that be fixed?
Usually. Foggy glass means one of three things: a broken heater wire, a bad gasket, or a failed seal inside the glass itself. The first two we fix on a service visit. The third means a new door panel. We can tell which one it is when we come look at your doors.
What does a wall of glass doors cost?
How many doors, the lighting, and whether we’re cutting new openings all change the price. We don’t post prices online, so call us and we’ll give you a rough number over the phone.
Do you install glass doors outside New England?
New England and New York are where we work day to day, out of our shop in Lakeville, MA. For major projects, we travel anywhere in the country. Chains with stores across a region are the usual reason we travel that far.

We love Doors!

Doors are what we do.

Call us with your measurements and specs for a budget quote or schedule time for one of our estimators to measure and provide you with a firm price.

(508) 946-5555

Monday to Friday, 7 to 4.

Before you buy glass

The Box Behind the Glass.

New doors won’t fix an old, failing box. If your box is the real question, repair or replace a walk-in cooler is the article to read next.

Start Your Project

Tell us what you’re building. We’ll tell you what’s possible.

01
Site visit & consult
We measure and listen, then quote.
02
Estimate
What we’ll do, in writing, within 2 business days.
03
Schedule
A date we set together, and keep.
04
Build
We build and install it in your building.
Start Your Project

1-year warranty on our labor and every RSNE-built door. We’re local, so we can service the door for its lifetime.